Read the second chapter of theText book” Understanding MechanicalDesign?”. Then answer the following questions using your own wording:2.1 Decompose a simple system such as a home appliance, bicycle, or toy into its assemblies,components, electrical circuits, and the like. Figures 2.3 and 2.11 will help.2.2 For the device decomposed, list all the important features of one component.2.3 Select a fastener from a catalog that meets these requirements:–  Can attach two pieces of 14-gauge sheet steel (0.075 in., 1.9 mm) together–  Is easy to fasten with a standard tool–  Can only be removed with special tools–  Can be removed without destroying either base materials or fastener2.4 Sketch at least five ways to configure two passengers in a new four-wheeled commutervehicle that you are designing.2.5 You are a designer of diving boards. A simple model of your product is a cantilever beam.You want to design a new board so that a 150-lb (67-kg) woman deflects the board 3 in.(7.6 cm) when standing on the end. Parametrically vary the length, material, and thicknessof the board to find five configurations that will meet the deflection criterion2.6 Find five examples of mature designs. Also, find one mature design that has been recentlyredesigned. What pressures or new developments led to the change?2.7 Describe your chair in each of the four languages at the three levels of abstraction, as wasdone with the bolt in Table 2.2.